BL7917-2 ORP Controller and Pump
BL7917-2 ORP Controller and Pump Controllers & Transmitters Process Control Selangor, Malaysia, Penang, Sabah, Kuala Lumpur (KL), Petaling Jaya (PJ), Sungai Nibong, Kota Kinabalu Supplier, Suppliers, Supply, Supplies | Hanna Instruments (M) Sdn Bhd
RM 4,657.00
6.000 KG
0 in stock
Download Files
manbl_7916_7917.pdf (0.98 MB)
The BL7917 combines a ORP meter with a chemical dosing pump in order to maintain a desired set point in process applications.

  • Two advanced instruments in one compact unit.
  • Convenient installation with all controls on front panel.
  • Widely used in plating, wastewater treatment, water treatment and swimming pools.

Easy Installation

  • Designed with mounting holes built into a rugged base, BL7917 is simple to install. All of the controls and pump assemblies are conveniently located on the front of the unit.
  •  

Proportional Dosing

  • A proportional control slows down the stroke rate as the measured value approaches the user selectable set points, avoiding overdosage of chemicals. This feature makes the pump’s dosing more accurate, saves chemicals and eliminates unnecessary and costly corrections to your process, especially with slow reacting chemicals.

Rugged Construction

  • BL7917 is housed in rugged, fiber-reinforced polypropylene IP55 rated casings to protect from hazardous spills and splashes. PVDF, FPM/FKM and PTFE materials are used for all parts that come into contact with liquid to resist corrosion caused by chemicals.

Isolated Recorder Output

  • To enhance troubleshooting and the ability to record data while monitoring, simply attach a recording device to the instrument’s 4 to 20 mA output contacts, conveniently located on the front panel, to obtain a copy of the results on demand.

Simple Pump Action

  • A positive displacement solenoid with few moving parts makes the BL7917 more reliable than motor driven pumps since there is no rotating parts, gears or cams; drastically reducing any chance of mechanical failure.

Auxiliary Dosing Contacts

  • Allows the user to attach a mixer or priming pump that is activated only when the pump is dosing.

ORP

ORP Range -999 mV to +999 mV
ORP Resolution 1 mV
ORP Accuracy ±5 mV

Process Control Meter

Alarm Relay Set Point 1 isolated, 2A, max. 240V, resistive load, 1,000,000 strokes
Dosing Control proportional, oxidizing or reducing, user selectable
Analog Ouput Signal 4-20 mA (isolated)
Dosing Terminals 1 isolated, 2A, max. 240V, resistive load, 1,000,000 strokes
Over Current Protection 250V fuse
Display LCD
Power Supply 230V ±15%; 50/60Hz (40W);
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
IP Rating IP55
Dimensions 221 x 142 x 181 mm (8.7 x 5.6 x 7.1’’)
Weight 5 kg (11 lb.)
Ordering Information BL7917-2 is supplied with 7 m (23') LPDE suction valves, polyethylene discharge tubing, 230V power cable and instructions.




 










 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version