BL982411-1 ORP Mini Controller
BL982411-1 ORP Mini Controller Mini Controllers Process Control Selangor, Malaysia, Penang, Sabah, Kuala Lumpur (KL), Petaling Jaya (PJ), Sungai Nibong, Kota Kinabalu Supplier, Suppliers, Supply, Supplies | Hanna Instruments (M) Sdn Bhd
RM 1,111.00
SKU: BL982411-1
300 g
8 cm (L) x 5 cm (W) x 10 cm (H)
1 in stock
Download Files
istbl2411_09_17.pdf (160.74 KB)

The BL982411 is a compact, easy to handle, efficient, ORP process controller designed for applications where space or cost is important. The device may be used with any ORP electrode with a standard BNC connector. It’s adjustable dosing relay may be configured to dose above or below a user programmable mV setpoint. Users may choose from automatic or manual dosing modes allowing for easy maintenance and troubleshooting.

Large Clear LCD

A large LCD clearly displays the parameter you are monitoring.

Fire Retardant Casing

Special materials provide additional protection in the event of an emergency.

BNC Connection

The controller’s high impedance pH input may be used with any pH electrode with a standard BNC connector.
 

BL982411

Adjustable Dosing Relay

The BL982411 features a dosing relay which may be configured to dose above or below a user programmable mV setpoint.

Selectable Overdose Protection

The mini controller may be programmed to deactivate a valve, pump, or connected device if its activation continues over a selected time; adjustable from 5 to 30 minutes.

Selectable Control Override

With the flick of a switch, normal “Auto” operation may be overridden turning your connected device “Off” from operation or always “On.”

BL982411

Fuse Protected Dosing Contacts

The mini controller is protected for up to a 2A load from a connected pump or device.

Easy Peripheral Connection

Quick-connect terminal blocks provide for easy connection to power, communication, dosing control, or sensors.

Matching Pin Connection

An included matching pin option helps protect the sensor from ground loop effects that may lead to erratic readings or system damage.

BL931700

Front View

Installation cut-out dimensions are provided as well as outside panel dimensions.

BL931700

Side View

Adjustable location brackets allow the controller to slide easily and securely into place.


 

SKU BL982411-web
Product Name ORP Mini Controller – BL982411
Quote Required Yes
ORP Range 0.0 to 199.9 ppm (mg/L)
ORP Resolution 0.1 ppm (mg/L)
ORP Accuracy ±2% f.s.
mV (ORP) Calibration manual, with CAL trimmer
mV (ORP) Dosing Relay maximum 2A (fuse protected), 250 Vac, 30 VDC
mV (ORP) Dosing Set Point adjustable from 0 to 199.9 mg/L (ppm)
Dosing Terminals reducing or oxidizing, selectable on the back panel
contact open=reductant dosage=relay ON if measurement > setpoint
contact closed=oxidant dosage=relay ON if measurement < setpoint
Over Dosing Control adjustable, typically from 5 to approximately 30 minutes
Power Supply models “-0”
Dimensions 83 x 53 x 99 mm (3.3 x 2.1 x 3.9’’)
Weight models “-0”
Ordering Information BL983315-1 (115/230 VAC) and BL983315-0 (12 VDC) are supplied with mounting brackets, transparent cover and instruction manual.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version