HI98539 Checktemp® Dip Digital Thermometer
HI98539 Checktemp® Dip Digital Thermometer Temperature Testers Selangor, Malaysia, Penang, Sabah, Kuala Lumpur (KL), Petaling Jaya (PJ), Sungai Nibong, Kota Kinabalu Supplier, Suppliers, Supply, Supplies | Hanna Instruments (M) Sdn Bhd
RM 465.00
500 g
1 in stock
Download Files
ist98539_11_15.pdf (883.34 KB)
The Checktemp Dip Digital Thermometer - HI98539 is a high-accuracy thermometer connected to a weighted, stainless steel probe by a 3 m (9.9’) flexible, silicone cable. The probe incorporates an NTC thermistor sensor, providing an extremely accurate temperature measurement that can satisfy your HACCP requirements.

  • CAL Check™
  • Selectable °C/°F readout
  • AISI 316 Stainless Steel Probe


The Checktemp Dip Digital Thermometer is a high-accuracy NTC thermistor thermometer connected to a weighted, stainless steel probe by a 3 m (9.9’) flexible, silicone cable. 

The weighted, stainless steel probe is designed to measure temperature in tanks, vats, streams, and lakes. Attached to the meter by 3 m of cable, the probe is capable of taking temperature readings at various depths. The probe is made of AISI 316 stainless steel which makes it easy to clean and ideal for temperature measurement in a variety of food and beverage applications such as in wine casks or milk storage tanks. 

The HI98539 Checktemp Dip is equipped with Hanna’s exclusive CAL Check® feature for reliable and accurate measurements. CAL Check automatically runs a self-check upon startup and looks for any drift in the internal electronics. The Checktemp Dip then reports the instruments status back to the user in a matter of seconds; 0 for ok and Err if something is wrong. 

Features at-a-glance:

  • ±0.3°C (±0.5°F) Accuracy
  • CAL Check™ - Automatically verifies calibration at startup
  • 3 m (9.9’) silicone cable
  • °C/°F readout – User selectable
  • Clear LCD display that is easy to read
  • IP 65 water resistant protection
  • HACCP Compatible - Use as a tool for control in HACCP analysis
  • AISI 316 stainless steel weighted probe
  • User-selectable auto-off (select from 8 min., 60 min., or disable)


Range (°C) -20.0 to 80.0°C
Range (°F) -4.0 to 176.0°F
Resolution (°C) 0.1°C
Resolution (°F) 0.1°F
Accuracy (°C) ±0.3°C
Accuracy (°F) ±0.5 ºF
Probe weighted stainless steel probe with 3 m (9.9’) silicone cable; 97.3 x dia 3.5 mm (3.8 x dia 0.14’’)
Battery Life 3 x 1.5V AAA Batteries/Approximately 2 years of use
Auto-off after ten minutes of non-use
Environment -30 to 50°C (-22 to 122°F); RH max 95%; IP65
Dimensions 107 x 59 x 17 mm (4.2 x 2.3 x 0.7’’)
Weight 109 g (3.8 oz.)
Ordering Information HI98539 (Checktemp Dip) is supplied with weighted stainless steel probe, 3 m (9.9’) silicone cable, batteries, and instructions.

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version