The BL983319 is a compact, panel mounted, process controller for measuring total dissolved solids (TDS) in a process stream that is within the 0 to 1999 ppm (mg/L) range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is below the set point. The relay can be used to supply power to a dosing pump to add fertilizer to a nutrient solution in order to maintain an ideal concentration.
*The BL983319 uses a 0.65 conversion factor in which 100 μS/cm = 65 ppm.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
This compact, panel mounted, process controller is ideal for measuring total dissolved solids (TDS) of a process stream. This controller features a large LCD with protective cover. Users may choose from automatic or manual dosing modes.
When in automatic mode, the dry contact relay is activated when a reading is below the set point. The relay can be used to supply power to a dosing pump to add fertilizer to a nutrient solution in order to maintain an ideal concentration.
BL983319 uses a 0.65 conversion factor in which 100 μ S/cm = 65 ppm.
- Model available with 4-20 mA galvanic isolated output with external dosing disable contact
- Large Clear LCD
- Fire Retardant Casing
- Splash-Resistant Cover
Adjustable Dry Contact Dosing Relay
The BL983319 features a dosing relay that is activated when the reading is below a user programmable set point.
Programmable Overdose Protection
For enhanced safety the mini controller can be programmed to deactivate the dosing relay if the set point is not reached within a specified time interval. The overdosing timer is programmable from 5 to 30 minutes or disabled.
Relay Control Override
With the flick of a switch the mini controller's relay can be disabled (Off), placed in control (Auto), or be activated for manual operation (On) which is useful for priming a dosing pump.
Multicolor LED Indicator
Multicolor LED indicator allows an operator to quickly check the status of the controller.
- Green = Meter in measurement mode and reading is below the set point.
- Orange/Yellow = Reading is above the set point and the relay is activated.
- Blinking Red = Indicates an alarm condition such as when the maximum dosing time has been exceeded.
Fuse Protected Dosing Contacts
The relay dosing contact is rated for up to a 2A load and is fuse protected.
Labeled Termination Connections
Quick-connect terminal blocks are clearly labeled for easy connection to power, conductivity probe and relay that can be used to operate a dosing pump, valve, audible alarm, or light.
1/2'' NPT Male Threaded Amperometric Probe for Mounting In-line*
The BL983319 mini controller uses the HI7634 conductivity probe that is available with different cable lengths.
*HI7634 is not included and must be ordered separately
| SKU | BL983319-web |
|---|---|
| Product Name | TDS Mini Controller (0 to 1999 ppm) - BL983319 |
| Quote Required | Yes |
| TDS Range | 0 to 1999 ppm (mg/L) |
| TDS Resolution | 1 mg/L ppm (mg/L) |
| TDS Accuracy | ±2% f.s. |
| TDS Calibration | manual, with CAL trimmer |
| EC/TDS Temperature Compensation | automatic from 5 to 50°C (41 to 122°F) with β =2%/oC |
| EC to TDS Conversion Factor | 0.65 |
| EC/TDS Dosing Relay | maximum 2A (fuse protected), 250 Vac, 30 VDC |
| EC/TDS Dosing Set Point | adjustable from 0 to 1999 mg/L (ppm) |
| Dosing Control | contact closed when measure < setpoint |
| Over Dosing Control | adjustable, typically from 5 to approximately 30 minutes |
| Power Supply | models “-0” |
| Dimensions | 83 x 53 x 99 mm (3.3 x 2.1 x 3.9’’) |
| Weight | models “-0” |
| Ordering Information | BL983319-1 (115/230 VAC) and BL983319-0 (12 VDC) are supplied with mounting brackets, transparent cover and instruction manual. |
